Deye 5kW hybrid inverter: installing a solar power system and would like to save some money, then you should look into getting a Deye hybrid inverter. Look no further than a 5kw Deye hybrid inverter – and find the perfect inverter for you.

This 5KW Deye Inverter can connect to solar panels and the grid simultaneously so that solar power can be stored in batteries and used when needed. Deye inverters can connect wind turbines and solar panels together, so you can harness the power of both wind and sun!

• The Deye 5kW inverter can also be used as inverter UPS or an inverter
• Deye vs Sunsynk – Two of the best solar inverters available right now are made by Deye.
• Deye solar inverter is designed to work with both AC and DC solar panels, so you can get the most power possible from solar panels.
• You won’t again have to be concerned about load shedding again thanks to this 5kw Deye hybrid inverter.
• A Hybrid inverter goes a step further and work with batteries to store excess power, so you can use it when you needed.

FEATURES.

• Wind turbines and solar panels can both be connected.
• Compatible with most Lithium-ion and AGM batteries.
• Unique Smart Load and Grid peak shaving function.
• Load or Home power first with Zero Export to the Grid.

DATASHEETS.

Deye 5kw hybrid inverter manual

BATTERY INPUT DATA.

• Battery Type: Lead-acid or Lithium-Ion.
• Voltage Range (V): 40-60V.
• Charging Current Max. (A): 120A.
• Discharging Current Max.   (A): 120A.

PV STRING INPUT DATA.

• DC Input Power: 6500W.
• PV Input Voltage: 370V (100V-500V).
• MPPT Range: 125-425V.
• Full Load DC Voltage Range: 240V-425V.
• Start-up Voltage: 150V.
• PV Input Current: 11A and 11A.
• of MPPT Trackers: 2.
• of Strings Per MPPT Tracker: 1+1.

The post Deye 5KW Hybrid Inverter first appeared on Solar Energy Systems West Coast South Africa.

• Marine (vessel power management)
• Power shedding (home / office / factory)
• UPS (fuel saving systems)
• Remote locations with solar and wind generators
• Building sites
• Military locations
• Telecommunication sites

Features

• 220V single phase, pure sine wave inverter
• Self consumption & feed-in to the grid
• Auto re-start while AC is recovering
• Programmable supply priority for battery or grid
• Programmable multiple operation modes; on-grid / off-grid & UPS
• Configurable battery charging – current / voltage based on applications by LCD setting
• Configurable AC / solar / generator charger priority by LCD setting
• Compatible with mains voltage or generator power
• Overload / over-temperature / short-circuit protection
• Smart battery charger designer optimised battery protection
• Limit-function installed to prevent excess power overflow to grid
• Supporting Wi-Fi monitoring and built-in 2 strings of MPP trackers
• Smart settable 3-stage MPPT charging for optimised battery performance
• Time of use function
• Smart load function

The post Sunsynk 8kW 1P Hybrid PV Inverter 48v first appeared on Solar Energy Systems West Coast South Africa.

• Marine (vessel power management)
• Power shedding (home / office / factory)
• UPS (fuel saving systems)
• Remote locations with solar and wind generators
• Building sites
• Military locations
• Telecommunication sites

Features

• 220V single phase, pure sine wave inverter
• Self consumption & feed-in to the grid
• Auto re-start while AC is recovering
• Programmable supply priority for battery or grid
• Programmable multiple operation modes; on-grid / off-grid & UPS
• Configurable battery charging – current / voltage based on applications by LCD setting
• Configurable AC / solar / generator charger priority by LCD setting
• Compatible with mains voltage or generator power
• Overload / over-temperature / short-circuit protection
• Smart battery charger designer optimised battery protection
• Limit-function installed to prevent excess power overflow to grid
• Supporting Wi-Fi monitoring and built-in 2 strings of MPP trackers
• Smart settable 3-stage MPPT charging for optimised battery performance
• Time of use function
• Smart load function

Ideal for powering TVs, decoders, computer equipment and appliances that consume more energy such as fridges, microwaves, washing machines, dishwashers, kettles and toasters.

Sunsynk-5.5kW Product Information

The post Sunsynk 5kW 1P Hybrid PV inverter 48v first appeared on Solar Energy Systems West Coast South Africa.

HF Series is new hybrid solar charge inverter, which integrates PV charge &Grid(Generator) charge with AC sine wave output.

Data sheet.

SRNE Off-Grid Inverter 3kW 24V 60A HF2430S60-100

The post SRNE Off-Grid Inverter 3kW 24V 60A HF2430S60-100 first appeared on Solar Energy Systems West Coast South Africa.

Grace
• Fashion apperance, light weight, smart operation；
• Natural cooling, low noise；
• IP65 , wall mounted design, saving space；

Reliable
• Compatible anti counter flow function；
• Battery reverse connect protection；

Advanced
• Intelligent energy management system for home；
• Power dispatching and demand side response management node；
• Distributed virtual power station management node；

Data sheet.

Megarevo 8kW Inverter

The post Megarevo 8kW Inverter – G2 Hybrid Inverter first appeared on Solar Energy Systems West Coast South Africa.

Grace
• Fashion apperance, light weight, smart operation；
• Natural cooling, low noise；
• IP65 , wall mounted design, saving space；

Reliable
• Compatible anti counter flow function；
• Battery reverse connect protection；

Advanced
• Intelligent energy management system for home；
• Power dispatching and demand side response management node；
• Distributed virtual power station management node；

Data sheet.

Megarevo 5kW Inverter

The post Megarevo 5kW Inverter – G2 Hybrid Inverter first appeared on Solar Energy Systems West Coast South Africa.

Battery
• Battery Type Supported: Lithium / Lead-Acid
• Normal Voltage: 51.2VDC / 48VDC
• Maximum Charging Voltage: 59VDC

Solar
• Maximum PV Power: 3200W / 3200W
• Number of MPP Trackers: 2
• Maximum PV Open Circuit Voltage: 480VDC
• MPPT Voltage Range: 100VDC – 385VDC
• Maximum Solar Charge Current: 100A
• Maximum Solar Input Current: 13A / 13A

Grid
• Normal Voltage: 230VAC
• AC Voltage Range: 110VAC-280VAC
• Maximum Charge Current: 60A
• Frequency Range: 50Hz / 60Hz (Auto Sensing)

Environment Limit
• Ingress Protection: IP20
• Relative Humidity: 5% to 95% (Non Condensing)
• Operating Temperature Range: 0°C to +50°C
• Storage Temperature: -15°C to +60°C
• Communication: CAN / RS485/ WIFI / GPRS

Data sheet.

Luxpower

The post LuxPower SNA5000 (LXP-SNA5000) first appeared on Solar Energy Systems West Coast South Africa.

Deye 8kW hybrid inverter: installing a solar power system and would like to save some money, then you should look into getting a Deye hybrid inverter. Look no further and find the perfect inverter for you.

This 8KW Deye Inverter can connect to solar panels and the grid simultaneously so that solar power can be stored in batteries and used when needed. Deye inverters can connect wind turbines and solar panels together, so you can harness the power of both wind and sun!

• The De ye 5kW inverter can also be used as inverter UPS or an inverter
• Deye vs Sunsynk – Two of the best solar inverters available right now are made by Deye.
• Deye solar inverter is designed to work with both AC and DC solar panels, so you can get the most power possible from solar panels.
• You won’t again have to be concerned about load shedding again thanks to this 5kw Deye hybrid inverter.
• A Hybrid inverter goes a step further and work with batteries to store excess power, so you can use it when you needed.

FEATURES.

• Wind turbines and solar panels can both be connected.
• Compatible with most Lithium-ion and AGM batteries.
• Unique Smart Load and Grid peak shaving function.
• Load or Home power first with Zero Export to the Grid

DATASHEETS

Deye 8kw hybrid inverter manual

BATTERY INPUT DATA.

• Battery Type: Lead-acid or Lithium-Ion.
• Voltage Range (V): 40-60V.
• Charging Current Max. (A): 120A.
• Discharging Current Max.   (A): 120A.

PV STRING INPUT DATA.

• DC Input Power: 6500W.
• PV Input Voltage: 370V (100V-500V).
• MPPT Range: 125-425V.
• Full Load DC Voltage Range: 240V-425V.
• Start-up Voltage: 150V.
• PV Input Current: 11A and 11A.
• of MPPT Trackers: 2.
• of Strings Per MPPT Tracker: 1+1.

The post Deye 8KW Hybrid Inverter first appeared on Solar Energy Systems West Coast South Africa.

Luxpower 10kW Hybrid Inverter, model LXP10K is ready to take your solar system to the next level. The Luxpower Hybrid Inverter is an inverter for solar panels, an inverter for solar power. This solar inverter with battery and solar panels converts the DC electricity generated by your solar panels into AC electricity. It has the ability to connect with solar panels and store energy in the lithium ion battery.

The Luxpower 10kW Hybrid inverter is a great inverter for installers. It is a hybrid inverter, which means that it can be used as an off-grid inverter or with grid-tie solar. This solar inverter with lithium battery is a great pure sine wave inverter product for solar systems and for installers of solar power. It was designed specifically with solar systems in mind.  The Luxpower 10kW Hybrid inverter is a solar inverter product from LuxPowerTek.

The Luxpower 10kW Hybrid Inverter comes with a 5-year warranty. It also has an LCD (liquid crystal display) colour touchscreen. The Luxpower 10kW Hybrid inverter is a powerful and advanced solar inverter that can be used for both residential and commercial applications. The LXP10K Luxpower model inverter for solar systems can be used with almost any lithium ion battery, and it has a seamless switching time. The nominal battery voltage is 48V, so it’s compatible with many different types of solar batteries. The Luxpower 10kW Hybrid inverter is rated for maximum efficiency of 97.50%, making it one of the most energy-efficient inverters for solar power / solar inverter on the market today. It comes with free wifi remote monitoring & remote upgrade capabilities so that you can monitor your system from anywhere in the world!

General Information.

• Manufacturer: LuxPowerTek
• Model: LXP 10K.

DATASHEET.

•  LuxPower
•  LuxPower Manual.

Battery Parameters.

• Compatible Battery Type: Lead-acid/lithium-ion battery.
• Nominal Battery Voltage: 48V.
• Battery Voltage Range: 40V-60V.
• Maximum Charging/Discharging Current: 210A/210A.
• Maximum Charging/Discharging Power: 10000W.

Input DC(PV Side).

• DC Input Power for Single MPPT: 12000W/7000W/7000W.
• PV Input Power: 16000W.
• DC Input Voltage Range: 100V-600V.
• Nominal DC Input Voltage: 360V.
• Full Power MPPT Voltage Range: 210-500V.
• DC Input Current: 25A/15A/15A.
• MPPT Number/(Strings per MPPT): 3(2/1/1).

General Data.

• Display: Color LCD.
• Topology: Transformer-less.
• Cooling: FAN.
• Communication: RS485/Wi-Fi/CAN.
• Standard Warranty: 5 years.

The post LuxPower Hybrid Inverter 10kW 48V first appeared on Solar Energy Systems West Coast South Africa.